Clean Agent Automatic Fire Systems

Background

The characteristics of electrical fire hazards are the distribution, persistence and concealment of fire hazards. Due to the wide distribution of electrical systems and long-term continuous operation, electrical lines are usually laid in concealed places (such as ceilings, cable trenches), and are not easy to be detected by the fire alarm system at the initial stage of a fire, nor are they easy to observe with the naked eye. The danger of electrical fire is also closely related to the electricity consumption. When the electricity load increases, it is easy to cause electrical fires due to overcurrent.
The casualties, property losses and social shocks caused by the fire are huge. Electrical fires mainly occur in buildings, where people are close, evacuation is difficult, and smoke is not smoothly exhausted. It is very easy to cause serious accidents of mass death and injury.

Principles of System

PRI-SAFETY electric equipment fire suppression systems have been specifically designed to protect electric equipment and put out electric fires caused by leakage electric (class E fire) quickly and efficiently.
These self contained pneumatic systems require no external energy or power supply. Upon flame impingement or heat, the pressurized detection tubing will burst and activate the cylinder valve to open and release the extinguishing agent.
PRI-SAFETY electric equipment fire suppression systems are specifically designed to extinguish fires of electric panel, battery bay, control panel, electric equipment etc. It is developed to prevent damage of equipment, records, people and other assets that are vital to a business.

Direct Type

Product Components

Product Specifications

Items No.	EFS-D01		EFS-D02		EFS-D03		EFS-D04		EFS-D06		EFS-D09
Agent Capacity (KG)	1KG		2KG		3KG		4KG		6KG		9KG
Extinguishing Agent	HFC-227ea, HFC-236fa, FK-5112
Working Pressure (bar)	14bar		14bar		14bar		14bar		14bar		14bar
Test Pressure (bar)	27bar		27bar		27bar		27bar		27bar		27bar
Cylinder Material	ST12 or SS304		ST12 or SS304		ST12 or SS304		ST12 or SS304		ST12 or SS304		ST12 or SS304
Detection & Discharge Pipe Tube	φ6mm
Activation Temperature Detection Tube (℃)	100℃, 120℃, 140℃, 170℃
Protection Volume (m³)	1~1.25m³	2~2.5m³		3~3.75m³		4~5m³		6~7.5m³		9~11.25m³

Product Principle

Indirect Type

Product Components

Product Specifications

Items No.	EFS-ID06	EFS-ID09	EFS-ID12	EFS-ID18	EFS-ID25	EFS-ID50
Capacity	6KG	9KG	12KG	18KG	25KG	50KG
Extinguishing Agent	HFC-227ea, HFC-236fa, FK-5112
Working Pressure (bar)	14bar	14bar	14bar	14bar	14bar	14bar
Test Pressure (bar)	27bar	27bar	27bar	27bar	27bar	27bar
Cylinder Material	ST12 or SS304	ST12 or SS304	ST12 or SS304	ST12 or SS304	ST12 or SS304	ST12 or SS304
Discharge Pipe	φ16mm SUS304				φ20mm SUS304
Detection Tube	φ6mm
Activation Temperature Detection Tube	140℃	140℃	140℃	140℃	140℃	140℃
Protection Volume (m³)	6~7.5m³	9~11.25m³	12~15m³	18~22.5m³	25~31.25m³	50~62.5m³

1kg—For 1~1.25m³ Electric Panel
2kg—For 2~2.5m³ Electric Panel
6kg—For 6~7.5m³ Electric Panel
9kg—For 9~11.25m³ Electric Equipment
12kg— For 12~15m³ Electric Room
20kg— For 20~25m³ Electric Room
Bigger Capacity Could be Customized
…

Advantage

• Simple, high quality and well engineered system. Easy to install.
• Fast, automatic actuation.
• We use gas instead of water to put out the fire without causing damage.
• When a fire occurs, the system will first detect it and then feedback control the fire extinguishing system to turn on and extinguish the fire within 10 seconds.
• Remaining operational during power interruptio.
• There is no need for manual close fire fighting.